This panic release allows one to exit from the inside without having to unlock the bolts. Check the panic release - is on the correct side and working? With the deadbolt extended use the handle and see if it will retract from the inside and stay locked on the outside. See article: Re-handing a Peachtree IPD Lockģ. Check lock is properly handed - Is the bevel on the correct side? If the lock is ordered wrong it can be re-handed. Check replacement lock to be sure it is functioning, handles operate latch and deadbolt extends and retracts.Ģ. Helpful Tips: BEFORE you do anything check the replacement mortise lock and be sure you have the correct one.ġ. Also, these pins must be in the exact location for the latches to extend and retract. The latch has to move in and out sometimes to allow the pins to travel through the latch. Because these bolts have angled slots the removal of the rods is not always easy. These slots move the latch in when the door closes and extends the latches to a bolt position when the handles are lifted. These bars travel through the center of the latches that have angled slots. The flat bars have small plastic coated pins that move the auxiliary latches. The middle of the door is the main lock body this has two (2) flat bars/rods that connect to the auxiliary modules/latches located above and below the main lock body. The IPD mortise lock is comprised of five (5) components that must be connected properly to function: 1 main lock body, 2 flat bars/rods, and 2 auxiliary modules/latches. We have written instructions and a video to assist with the replacement of the existing lock. Peachtree IPD 3-point multi lock system This article contains information on the IPD multi-point lock components and tips to prevent having to re-install this lock more than once, or worse – locking the door and not being able to unlock.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |